Courses
Admissions & Support
Electrical Technology (Bachelor of Engineering, L7, 60 ECTS)
-
Status: Register Your Interest
-
Campus: Blended
-
years: 2.5
-
Fees: €6,925
Course Overview
The aim of this programme is to provide a progression route in the area of Electrical Technology, for qualified advanced craft-persons and national/higher certificate holders with qualifications at, or equivalent, to level 6 on the NQAI framework. The Bachelor of Engineering in Electrical Technology seeks to provide a programme that is learner-centred in terms of flexibility of quantity, duration, timing and pace of study.
The programme aims to provide each learner with the following:
- The higher technological skills relevant to the design of electrical engineering systems in industry.
- Further education that upgrades the learner’s skills and strengthens the learner’s life and working experiences.
- The opportunity to undertake a substantial work-based project or design study that will benefit his/her employer.
- A wide choice of elective modules to enable the learner customise the programme in line with his/her personal and vocational development.
- An educational experience at Ordinary Degree level which will encourage the development of higher technical skills, judgement, attitudes and personal attributes that will benefit the graduate.
- Upon completion the learner will be a fully rounded graduate; intellectually competent to self-direct their learning and fully empowered to continue their professional development.
PLEASE NOTE THIS DEGREE IS NOT ACCREDITED BY ENGINEERS IRELAND.
Contact Details
What are the entry requirements?
The Bachelor of Engineering in Electrical Technology (Level 7) is an add-on ordinary degree, specifically designed for those with a level 6 qualification in a cognate electrical field.
A candidate should have relevant experience in a technical role in the electrical services or industrial sector. A candidate must also meet the following minimum entry requirements.
a. Level 6 Advanced Certificate in Craft-Electrical (or equivalent trade) with a merit; or a pass with two year’s post qualification experience.
b. National or Higher Certificate in Engineering or Technology with specialization in Electrical, or equivalent, at Pass level. (QQI Level 6 Qualification).
or
Recognised Prior Learning (RPL) – Assessment
Please review the academic entry requirements for this programme.
If you do not hold these qualifications but would like your application to be assessed under RPL please select YES on the online application form. Once you have submitted your online application you will then receive an email acknowledgement with further instructions on RPL.
ENGLISH LANGUAGE: Applicants who do not have English as their first language must ensure they satisfy English Language requirements. For entry to undergraduate courses, a score of 5.5 in an IELTS or equivalent exam is required. For postgraduate courses, a score of 6.0 in an IELTS or equivalent exam is required. It is the responsibility of the applicant to ensure their English proficiency meets these requirements.
Course Content
-
Electrical Testing and Certification* (Mandatory)
Credits: 5
The aim of this module is to provide the learner with an in depth knowledge of the requirements of the National Rules for Electrical Installations (Fourth Edition ET101:2008) for inspection, testing and certification of Industrial and commercial electrical installations.
-
Electrical Planning and Layout* (Mandatory)
Credits: 5
The aim of this module is to provide the learner with a specialized knowledge of the safe design techniques, software tools and approaches to the safe planning of a commercial and industrial electrical installation. Note: This module is closely related to the Electrical Project module.
-
Electrical Project* (Mandatory)
Credits: 10
The aim of this Module is to provide the learner with the opportunity to develop their independent leadership and project management skills through the study, analysis, development and resolution of a relevant Industry project. A reflective analysis approach is adopted in the selection of a suitable project and the assessment is based on a final report and presentation.
-
Mathematics 1* (Mandatory)
Credits: 5
The aim of this module is to provide the learner with a broad knowledge of the application of engineering maths and applied statistics.
-
Project Management* (Mandatory)
Credits: 5
To provide the learner with a broad knowledge of the techniques, software tools and approaches used in project management in industry.
-
Advanced PLC Systems (Elective)
Credits: 5
To provide the learner with a specialised knowledge of advanced automation systems, structured programming approaches and distributed control applications
-
Electrical Machines (Elective)
Credits: 5
The aim of the module is to provide the learner with specialist knowledge of the types, sizing, characteristics and applications of single and three-phase AC and DC motor in manufacturing facilities.
-
Energy Efficiency in Industry (Elective)
Credits: 5
The aim of the module is to provide the learner with specialist knowledge of and analysis methods for energy usage in industry with a focus on energy efficiency and carbon emission reduction.
-
Programmable Logic Controller Systems (Elective)
Credits: 5
The module aims to provide the learner with a broad knowledge of automation systems, programming approaches and industrial control applications.
-
Distributed Electrical Systems (Elective)
Credits: 5
The aim of the module is to provide the learner with specialised knowledge of the efficiency and electrical integration of electrical equipment and plant in a manufacturing facility.
-
Management Accounting and Methods (Elective)
Credits: 5
The aim of this module is to provide the learner with a broad knowledge of costs applied to the value chain in industry and management techniques to control them.
-
Computer Aided Design (Elective)
Credits: 5
Computer Aided Design is an essential communication and design technique for those involved in engineering. The aim of this module is to give the student a comprehensive introduction to the standards used in the preparation of Engineering drawings. Computer Aided Design (CAD) systems are now the typical means by which Engineering drawings and associated 3D models are produced, students will use 3D CAD software to prepare a portfolio of their work.
-
Electrical Power Systems (Elective)
Credits: 5
To provide the learner with specialised knowledge of the types, characteristics and applications of power supply and storage systems
-
Industrial Maintenance Systems (Elective)
Credits: 5
This module aims to provide the learner with a broad knowledge of modern maintenance strategies, management approaches and control systems
-
Computer Networks (Elective)
Credits: 5
The aim of this module is to introduce the learner to Computer networks including infrastructure, operating systems, network management, data protection and internet technology
-
Computer Systems (Elective)
Credits: 5
To provide the learner with a broad knowledge of computer system including cloud and mobile computeing, components, storage and memory systems, operating systems and diagnostics.
-
HMI and SCADA (Elective)
Credis: 5
This subject aims to give the learner the skills needed to successfully design, develop and integrate a SCADA solution in industry.
-
Instrumentation and Calibration (Elective)
Credits: 5
The aim of this module is to provide learners with the knowledge of industrial process instrumentation, calibration and control which includes the concepts, engineering and installation of control and measurement equipment.
-
Renewable Energy Technology 2 – Wind Energy (Elective)
Credits: 5
To give the learner a thorough introduction to the conversion of wind energy into electrical energy
-
Solar Energy Systems (Elective)
Credits: 5
The aim of this module is to give learners a detailed understanding of the operation and application of PhotoVoltaic and Solar Thermal Systems
More Information
-
The proposed delivery schedule is subject to change.
Successful applicants must complete 11 modules, including a work-based project in order to complete the required 60 credits. Each module is 12 weeks in duration, one evening per week. A range of modules are offered in Semester 1 (September to December) and in Semester 2 (January to May) each academic year. Modules are a mix of online, blended and classroom based. All classroom-based elements will take place onsite at the Moylish campus in Limerick. Degree registered students will be contacted twice yearly with the selection of modules available for the coming semester.
On average students complete 2 modules per Semester.
-
Each 5 credits will normally equate to approximately 100 Total Learning Hours. Total Learning Hours includes the time you spend in class (lectures, tutorials, practical elements) and the time you spend completing work outside of college. The balance between these two varies by discipline, and by level of study. You should bear in mind that the workload will increase at particular times e.g. when assignments are due.
-
Modules are assessed using a mixture of continuous assessment and examinations. It is important to note that final module exams normally take mid-week and during normal working hours.
-
Bachelor of Engineering in Electrical Technology (Level 7,60 ECTS)
-
The total fee for this programme is €6,925.
5 credit modules – €625
10 credit Project – €675
-
-
Application Process for 2025/2026 will be opened Approximately February 2025
Please click Register Your Interest to be informed when applications open